This page shows the work that was done on the floor and b-post.

 

Here is a before pic of the rocker/b-post area.

Notice the rot on the bottom and how the sheet metal on the side is wrinkled.

Obviously, this car had a prior accident that no one bothered to repair.

 

Below is an inside view, notice how you can see the grass thru the corner.

You can also see the damage to the floor caused by the leaking air horn in the cowl.

 

Here is a mid-progress pic.

I have removed the sheet metal, which will be replaced.

You can still see the damage to the frame section.

 

Its hard to see in this pic, but I have removed the damaged frame section.

 

These 2 pics show the new corner frame piece donated by a 72 Challenger.

 

Here is what it all looks like when done.

(The red stuff is primer dust, I dust with primer between coats of POR-15 for better adhesion)

Hey...you can see Owen's Super Bee in the background..not that you could recocnize it :)

 

Now, on to the passenger floor.

The pic on the right (above) shows the floor cut out and ready for the new pan.

Its hard to see, but the arrows point to it. You can also see the finished pass-side floor.

 

Here is what the finished product looks like.

btw...the black stuff is the POR-15 rust inhibitor I mentioned above.

Glad this part is done.....

Back Next